很遗憾,因您的浏览器版本过低导致无法获得最佳浏览体验,推荐下载安装谷歌浏览器!

高压共轨喷油器试验台CRS318

公司: 泰安市精达动力机械制造厂
联系人: 邹经理
手机: 13854822395(微信同号)
电话: 0538-8806938
Q Q: 467884550
地址: 山东省泰安市徐家楼工业园
留言咨询 更多信息
分享:

摘要

下面的内容是对于高压共轨喷油器试验台的使用注意事项阐述,所展示的喷油泵试验台都是现场拍摄,提供的内容都是经过泰安市泰山区精达动力机械制造厂高压共轨试验台厂家经验所得,请点击进入查看更多液压泵试验台的相关行业信息吧。

高压共轨喷油器试验台CRS318

该款电喷高压(可含中压共轨)喷油器检测试验台是我公司2020新研发的柴油高压共轨喷油器及可增加HEUI机油促动卡特C7C9 C-9等喷油器测试功能试验台,采用全新BOSCHCP3.3共轨油泵提供高压源,高压共轨喷油器试验台内置3100余种共轨喷油器的标准数据,可检测欧三欧四欧五(压电陶瓷式喷油器)国六等标准电喷油嘴,设备具备高压清洗功能采用高精度传感器自动检测全负荷、怠速、预喷射等各工况下的喷油量和回油量,并可检查喷油器响应时间测试QR码校验功能,是检测电喷柴油高压共轨喷油器理想试验设备。

高压共轨喷油器试验台CRS318

主要功能:

1、变频驱动共轨油泵产生全负荷工况240MPa的压力

2、轨压自动闭环控制,显示精度0.1MPa

3、内置共轨喷油器标准数据库,免费升级,用户也可以自由添加数据

4、共轨喷油器标准数据库配备各型号喷油器的控制波形数据,向喷油器输出标准控制波形信号

5、可检测博世、卡特,电装、德尔福、西门子等各品牌高压及可增加中压共轨HEUI(机油))共轨喷油器功能。

6、工业电脑主板,嵌入式windows XP操作系统

7、喷油量和回油量系统及流量传感器自动测量,屏幕显示。

8、可生成测试数据报表,可以存储和打印(可选)

9、启动油量检测。

高压共轨喷油器试验台CRS318

10、高压共轨喷油器试验台检测共轨喷油器开启压力

11、检测共轨喷油器的密封性

12、检测共轨喷油器怠速工况

13、检测共轨喷油器全负荷工况

14、检测共轨喷油器启动工况和回油量。

15、检测共轨喷油器预喷射工况

16、检测共轨喷油器高压冲洗功能

17、检测共轨喷油器雾化质量

高压共轨喷油器试验台CRS318

参数:

1.输出功率:5.5KW

2.电机转速范围:0--2000rpm

3.温度控制范围:40±2℃

4.喷油器驱动电流:28A

5.喷油器测试持续时间:100--3000μs

6.工作压力调节范围:0--2500Bar.

7.压力控制精度:±0.5Mpa

8.流量测量范围:0--600ml/1000次

9.流量测量精度:0.01ml

10.温度冷却方式:水冷或风冷。

高压共轨喷油器试验台CRS318

This EFI high-pressure (including medium pressure common rail) injector test bench is a new diesel high-pressure common rail injector developed by our company in 2020 and an injector test function test bench that can add HEUI oil to actuate Carter c7c9 C-9 and other injectors. The new boschcp3.3 common rail oil pump is used to provide high-pressure source, and the high-pressure common rail injector test bench has built-in standard data of more than 3100 common rail injectors, It can detect the European three European four European five (piezoelectric ceramic injector) national six standard electric fuel injector. The equipment has the function of high-pressure cleaning. It uses high-precision sensors to automatically detect the fuel injection and return volume under full load, idle speed, pre injection and other working conditions, and can check the response time of the fuel injector. It can test the QR code verification function. It is an ideal test equipment for detecting the high-pressure common rail fuel injector of EFI diesel.

Main functions:

1. The frequency conversion drive common rail oil pump produces a pressure of 240mpa under full load condition

2. Rail pressure automatic closed-loop control, display accuracy 0.1MPa

3. Built in common rail injector standard database, free upgrade, users can also add data freely

4. The common rail injector standard database is equipped with the control waveform data of each type of injector and outputs the standard control waveform signal to the injector

5. It can detect the high pressure of Bosch, Carter, Denso, Delphi, Siemens and other brands, and can add the function of medium pressure common rail HEUI (oil)) common rail injector.

6. Industrial computer motherboard, embedded Windows XP operating system

7. The fuel injection quantity and return quantity system and flow sensor automatically measure and display on the screen.

8. Test data report can be generated, and can be stored and printed (optional)

9. Start the oil quantity detection.

10. High pressure common rail injector test bench detects the opening pressure of common rail injector

11. Check the sealing of common rail injector

12. Check the idling condition of common rail injector

13. Check the full load condition of common rail injector

14. Check the starting condition and fuel return volume of common rail injector.

15. Detect the pre injection condition of common rail injector

16. Test the high-pressure flushing function of common rail injector

17. Test the atomization quality of common rail injector

Parameters:

1. Output power: 5.5kw

2. Motor speed range: 0--2000rpm

3. Temperature control range: 40 ± 2 ℃

4. Fuel injector driving current: 28a

5. Fuel injector test duration: 100--3000 μ s

6. Working pressure adjustment range: 0--2500bar

7. Pressure control accuracy: ± 0.5MPa

8. Flow measurement range: 0--600ml / 1000 times

9. Flow measurement accuracy: 0.01ml

10. Temperature cooling mode: water cooling or air cooling.

英文由百度翻译,仅供参考。


更多>>

相关推荐

  • CRS3000C(CRI200)高压共轨喷油器试验台

  • CRS708高压共轨试验台

  • CRS918高压共轨综合试验台

  • CRS618中压HEUI高压共轨喷油器试验台

泰安市精达动力机械制造厂位于驰名中外的泰山脚下,是喷油泵试验台生产、销售和服务一条龙的汽修检测设备生产企业。主营:校油泵试验台,电喷油泵试验台,高压油泵试验台,电喷油嘴试验台,柴油机油泵试验台,EMC喷油泵试验台,液压油泵方向机试验台,潍柴油泵试验台,高压共轨喷油器试验台,708型电喷试验台等产品畅销国内外市场,深受用户的好评!热线13854822395

CopyRight © 版权所有: 泰安市泰山区精达动力机械制造厂 技术支持:佰搜网 0538-7177991 网站地图 XML

本站关键字: 高压共轨试验台 喷油泵试验台 12psb喷油泵试验台 方向机试验台 液压泵试验台 电喷喷油器试验台 crs高压共轨试验台 喷油器专用工具


高压共轨试验台