设备采用伺服电机驱动共轨BOSCH油泵，设备设备内置2400余种共轨喷油器的标准数据，可检测欧三 欧四欧五（压电陶瓷式喷油器）国六等标准电喷油嘴，设备具备高压清洗功能采用高精度传感器自动检测全负荷、怠速、预喷射等各工况下的喷油量和回油量。
主要功能和特点：
1、变频驱动共轨油泵产生最大210MPa的压力
2、轨压自动闭环控制，显示精度0.1MPa
3、内置共轨喷油器标准数据库，免费升级，用户也可以自由添加数据
4、共轨喷油器标准数据库配备各型号喷油器的控制波形数据，向喷油器输出标准控制波形信号
5、可检测博世、电装、德尔福、西门子等各品牌高压共轨喷油器。
6、工业电脑主板，嵌入式windows XP操作系统
7、喷油量和回油量自动测量，屏幕显示
8、可生成测试数据报表，可以存储和打印
9、启动油量检测。
10、检测共轨喷油器开启压力
11、检测共轨喷油器的密封性
12、检测共轨喷油器怠速工况
13、检测共轨喷油器全负荷工况
14、检测共轨喷油器启动工况
15、检测共轨喷油器预喷射工况
16、检测共轨喷油器高压冲洗功能
17、检测共轨喷油器雾化质量
Equipment adopts servo motor drive common rail, BOSCH pump equipment built more than 2400 kinds of common rail injector standard data, detects the three ou four o five (piezoelectric type injector) nozzle, the six standards such as ems equipment have high pressure cleaning function with high precision sensor automatic detection, idle , full load in the process of the injection under various operating conditions such as fuel injection and oil return amount.
Main functions and features:
1. The pressure of maximum 210MPa is generated by frequency conversion driven common rail oil pump.
2. Automatic closed-loop control of rail pressure, showing accuracy of 0.1mpa.
3. Standard database of built-in common rail injector, free upgrade, users can also add data freely.
4. The standard database of common rail injector is equipped with the control waveform data of each type of injector, and the standard control waveform signal is controlled to the injector.
5. It can detect the high pressure common rail injector of Bosch, electric suit, Delphi and Siemens.
6. Industrial computer motherboard, embedded Windows XP operating system.
7. Automatic measurement of fuel injection and oil recovery, screen display.
8. Generate test data report, which can be stored and printed.
9. Start oil measurement.
10. Test common rail injector to open pressure.
11. Check the seal of common rail injector.
12. Test the idle condition of common rail injector.
13. Check the full load condition of common rail injector.
14. Check the start-up condition of common rail injector.
15. Check the pre-injection condition of common rail injector.
16. Check the high pressure washing function of common rail injector.
17. Detect the atomization quality of common rail injector.
