01. 测试不同转速下的各缸供油量
02. 静态检查各缸供油的时间
03. 检查调速器性能
04. 分配泵电磁阀的试验
05. 检查气动调速器性能
06. 检查增压补偿器性能
07. 检查分配泵的输油供油能力
08. 测量分配泵泵体内压
09. 检查气膜调速器负压性能
二：主要技术参数：
1.量筒：45ml 量筒各两套；
2.燃油箱容积：60L；
3.油温自动控制：40±2℃；
4.试验油滤油精度：5μ；
5.直流电压12V和24V；
6.供油压力：低压：0~0.4Mpa，高压：0~4Mpa;
7.泵体内压显示：0~0.16Mpa及0~1.6Mpa；
8.气压显示：正压：0~0.3Mpa负压：-0.03~0Mpa；
9.转速预置：0~4000RPM可任意预置；
10.齿条行程量程：0~25MM；
11.中心高：125MM；
12.飞轮惯量：0.8KG.M2。
功能和特点介绍：
01. 测试A P I II VE等柴油泵不同转速下的各缸供油量
02. 对喷油泵进行断油检测
03. 可左右两边控制设备运转，方便用户操作。
04. VE分配泵电磁阀的试验
05. 该试验台转速 计数均可预置，并可进行保存，升降速快捷。
06. 对带增压补偿油泵模拟测试
07. 检查VE系列分配泵的输油供油压力等参数
08. 测量分配泵泵腔体体内压，并可测试流量。
09. 设备转速可根据需要设定（1-4000r/min）
10配PJ40喷油嘴校验器及其他辅具。
本文来源：12PSB-D型喷油泵试验台整理发布，仅供参考，不做实际应用。具体详细细节需要联系我们网站上面的电话进行咨询确认。
12psb-d fuel injection pump test bench functional parameters:
The main machine of this test-bed is variable-frequency speed regulation, the speed is preset arbitrarily, and the digital meter displays the speed, count, oil temperature and gear.
Function introduction:
01. Test the oil supply of each cylinder at different speeds
02. Statically check the oil supply time of each cylinder
03. Check the governor performance
04. test of distribution pump solenoid valve
05. Check the performance of pneumatic governor
06. Check the performance of boost compensator
07. Check the oil delivery capacity of the distribution pump
08. Measure the internal pressure of the distribution pump
09. Check the negative pressure performance of the air film governor
10. 12psb-d fuel injection pump test bench conducts the sealing test of fuel injection pump
2： Main technical parameters:
1. Measuring cylinder: two sets of 45ml measuring cylinders;
2. Fuel tank volume: 60L;
3. Automatic oil temperature control: 40 ± 2 ℃;
4. Oil filtering accuracy of test oil: 5 μ；
5. DC voltage 12V and 24V;
6. Oil supply pressure: low pressure: 0~0.4mpa, high pressure: 0~4mpa;
7. Pump body pressure display: 0~0.16mpa and 0~1.6mpa;
8. Air pressure display: positive pressure: 0~0.3mpa negative pressure: -0.03~0mpa;
9. Speed preset: 0~4000rpm can be preset arbitrarily;
10. Rack stroke range: 0~25mm;
11. Center height: 125mm;
12. Flywheel inertia: 0.8kg.m2.
Introduction to functions and features:
01. Test the fuel supply of each cylinder at different speeds of diesel pumps such as a p I II ve
02. Conduct fuel cut-off detection for fuel injection pump
03. It can control the operation of the equipment on the left and right sides, which is convenient for users to operate.
04. Test of VE distribution pump solenoid valve
05. The speed counting of the test bench can be preset and saved, and the speed rise and fall is fast.
06. Simulation test of oil pump with booster compensation
07. Check the oil delivery pressure and other parameters of VE series distribution pump
08. Measure the pressure in the cavity of the distribution pump and test the flow.
09. The rotating speed of the equipment can be set as required (1-4000r/min)
10 equipped with Pj40 injector calibrator and other auxiliary tools.
Source of this article: 12psb-d fuel injection pump test-bed is sorted out and released for reference only, not for practical application. For specific details, please contact the phone on our website for consultation and confirmation.
英文由百度翻译，仅供参考。
