12V180-190油田内燃机喷油泵试验台

泰安市泰山区精达动力机械制造厂为大家带来关于12V180-190油田内燃机喷油泵试验台的详细介绍，并图文并茂的给大家展示了高压共轨喷油器试验台的使用，预知详情请点击高压共轨喷油器试验台厂家的官方网站进行查询吧。

我公司根据油泵油嘴行业要求自行设计研制的一代柴油机燃油喷射系统检测调试设备12V--180 190（济柴专用）12V系列合泵试验台。该产品主传动采用当今的变频调速技术，无级调速范围可达0－4000rpm，喷油泵试验台转速稳定，输出扭矩大，超低噪音。试验台转速、量油计数、燃油温度、气体压力等功能，全部用数字显示，显示清晰、工作可靠、控制精度高。该试验台突出的一个特点是：可以通过凸轮箱同时驱动主副两个油泵同时工作，实时检测12V180  190等合泵的各个工作工况。具有多档转速预置，预置转速快、精度高，这样大大地节省了调泵时间，提高了工作效率。

一、主要特点主机传动采用变频调速，调速范围在±4000转/分。量油计数、主轴转速、齿杆行程、提前角度，均采用四位数显。燃油温度为三位数显。手动调速和转速多档预置。 0-0.25Mpa气源输出,内置式打气泵。具有DC12V和DC24V稳压电源输出。主机为槽钢框架结构，整体结构紧凑、稳固。壳体采用静电喷塑，机壳美观。集油箱可左右旋转，亦可上下调整。试验台有紧急制动开关。采用控制方式的变频调速器，转速精度高。试验台有欠压、过压、过热、过载等保护功能。试验台双侧操作，方便灵活。试验台超低噪音。机械效率高，节约能源。这款试验台是油田内燃机维修检测行业的！

二、根据所调试的油泵，选用适当的附具，可进行如下项目的调试：

1、测试不同转速下喷油泵的各缸供油量和供油均匀性。

2、测试喷油泵的供油始点及供油间隔角度。

3、速器工作性能的检查及调整。

4、压力补偿性能的测试及检查。

5、分配泵工作性能的测试及调整。

6、冷启动装置及电磁阀性能检查。

7、分配泵各种转速下的回油量测量。

8、分配泵各种转速下的内压测定。

9、喷油泵密封性能实验。

10、检查输油泵自吸功能。

11、内置高可靠性卧式打气泵。

三、主要技参数主轴转速：0-4000转/分，正反转选择。较多可测试喷油泵缸数：12缸。主轴转速波动：±5转/分。主机功率： 标准功率为30KW（也可以根据用户需要定做）。供油传动电机功率：1.1KW。主轴中心距工作台高度：125mm。量油计数：0－1000次，每50次一档。转速、计数、齿杆行程、提前角度，显示位数：4位。气压、燃油温度显示位数：3位燃油温度自动控制：40℃±2℃。气源压力：0-0.25Mpa。燃油箱容积：≥ 40L 。燃油泵供油量：≥ 10升/分。燃油滤清器精度：5μ。玻璃量筒体积：大量筒：150ml。小量筒：45ml。燃油压力表1.5级：0-0.6Mpa；0-6Mpa；0-0.16Mpa；0-1.6Mpa。标准喷油器：ZS12SJI（190油泵专用型）

• 

• According to the requirements of the oil pump and nozzle industry, our company has designed and developed a generation of diesel engine fuel injection system testing and commissioning equipment 12v--180 190 (special for jichai) 12V series pump combining test bench. The main drive of this product adopts the current frequency conversion speed regulation technology, and the stepless speed regulation range can reach 0-4000rpm. The fuel injection pump test bench has stable speed, large output torque and ultra-low noise. The functions of the test-bed, such as rotating speed, oil measurement and counting, fuel temperature, gas pressure, etc., are all displayed digitally, with clear display, reliable operation and high control accuracy. A prominent feature of this test-bed is that it can simultaneously drive the main and auxiliary oil pumps through the cam box to work at the same time, and real-time detect all working conditions of the 12V180 190 isochronous pump. With multi gear speed preset, the preset speed is fast and high precision, which greatly saves the pump adjustment time and improves the work efficiency.

• 1、 Main features: the main engine adopts frequency conversion speed regulation, and the speed regulation range is ± 4000 rpm. Four digit digital display is used for oil measurement and counting, spindle speed, gear rod travel and advance angle. The fuel temperature is displayed in three digits. Manual speed regulation and speed multi gear preset. 0-0.25mpa air source output, built-in air pump. It has DC12V and DC24V regulated power output. The main machine is of channel steel frame structure, and the overall structure is compact and stable. The shell adopts electrostatic plastic spraying, and the shell is beautiful. The oil collecting tank can be rotated left and right, and can also be adjusted up and down. The test bench has an emergency brake switch. The frequency converter with control mode has high speed accuracy. The test bench has the protection functions of undervoltage, overvoltage, overheating, overload, etc. The test bench is operated on both sides, which is convenient and flexible. The test bench has ultra-low noise. High mechanical efficiency and energy saving. This test-bed is for the maintenance and testing industry of internal combustion engines in oil fields!

• 2、 According to the oil pump being debugged, the following items can be debugged by selecting appropriate accessories:

• 1. Test the fuel supply quantity and uniformity of each cylinder of the fuel injection pump at different speeds.

• 2. Test the fuel supply starting point and fuel supply interval angle of the fuel injection pump.

• 3. Check and adjust the working performance of the speed reducer.

• 4. Test and inspection of pressure compensation performance.

• 5. Test and adjust the working performance of distribution pump.

• 6. Performance inspection of cold start device and solenoid valve.

• 7. Measure the return oil volume of the distribution pump at various speeds.

• 8. Internal pressure measurement of distribution pump at various speeds.

• 9. Fuel injection pump sealing performance test.

• 10. Check the self-priming function of the oil transfer pump.

• 11. Built in high reliability horizontal air pump.

• 3、 Main technical parameters: spindle speed: 0-4000 rpm, forward and reverse selection. More fuel injection pump cylinders can be tested: 12 cylinders. Spindle speed fluctuation: ± 5 rpm. Host power: the standard power is 30kW (can also be customized according to user needs). Power of oil supply transmission motor: 1.1KW. Height from spindle center to workbench: 125mm. Oil measurement and counting: 0-1000 times, one gear every 50 times. Speed, count, gear rod travel, advance angle, display digits: 4. Display digits of air pressure and fuel temperature: 3 digits automatic control of fuel temperature: 40 ℃± 2 ℃. Air source pressure: 0-0.25mpa. Fuel tank volume: ≥ 40L. Fuel supply capacity of fuel pump: ≥ 10 L / min.  Fuel filter accuracy: 5 μ。 Volume of glass measuring cylinder: large cylinder: 150ml. Small measuring cylinder: 45ml. Fuel pressure gauge level 1.5: 0-0.6mpa;  0-6Mpa； 0-0.16Mpa； 0-1.6Mpa。 Standard injector: zs12sji (special type for 190 oil pump)

• 内容由百度翻译，仅供参考。