大功率燃油高压喷油泵试验台
1.测试不同转速下的各缸供油量；
2.静态检查各缸供油时间；
3.检查机械调速器性能；
4.分配泵电磁阀的试验；
5.检查气动调速器性能；
6.检查压力补偿器性能；
7.分配泵回油量测量；
8.测量分配泵泵体内压；
9.检查气膜调速器负压性能；
10.测量齿条行程；
11.进行喷油泵密封性能试验；
12.测试喷油泵提前角功能；
13.检测济柴12V190高压油泵的各项性能.
14.三T型加大工作台 随机佩带大流量标准喷油器。
二、大功率喷油泵试验台主要技术参数：
1.量筒：150/260CC各一套；
2.燃油箱容积：75L；
3.油温自动控制：40±2℃；
4.试验油滤油精度：5μ；
5.直流电压12V和24V；
6.大功率燃油高压喷油泵试验台功能的供油压力：低压：0~0.4Mpa，高压：0~4Mpa;
7.泵体内压显示：0~0.16Mpa及0~1.6Mpa；
8.气压显示：正压：0~0.3Mpa负压：-0.03~0Mpa；
9.转速预置：0~3000RPM可任意预置；
10.齿条行程量程：0~25MM；
11.中心高：125MM；
12.飞轮惯量：0.8KG.M2;
13.输出功率：30KW 37KW 45KW等；
船用P系列喷油泵，内燃机高压燃油泵，工程机械发动机柴油泵测试试验台；设备支持定制加工，试验台底座为铸铁加厚型，运行平稳，配大流量标准喷油器，加宽型喷油泵垫铁及夹具；
重载矢量变频器驱动主电机，扭矩更足，设备油箱为304不锈钢，适合各种标准燃油介质，适合生产及维修油泵单位适用。
本文来源：喷油泵试验台整理发布，仅供参考，不做实际应用。具体详细细节需要联系我们网站上面的电话进行咨询确认。
1、 Function
High power fuel high pressure fuel injection pump test bench
1. Test the oil supply of each cylinder at different speeds;
2. Statically check the oil supply time of each cylinder;
3. Check the performance of mechanical governor;
4. Test of distribution pump solenoid valve;
5. Check the performance of pneumatic governor;
6. Check the performance of pressure compensator;
7. Measurement of oil return volume of distribution pump;
8. Measure the internal pressure of the distribution pump;
9. Check the negative pressure performance of the air film governor;
10. Measure the rack stroke;
11. Conduct sealing performance test of fuel injection pump;
12. Test the advance angle function of fuel injection pump;
13. Check the performance of jichai 12V190 high pressure oil pump
14. The three T-type enlarged workbench is equipped with a large flow standard injector.
2、 Main technical parameters of high-power fuel injection pump test bench:
1. Measuring cylinder: one set of 150/260cc each;
2. Fuel tank volume: 75L;
3. Automatic oil temperature control: 40 ± 2 ℃;
4. Oil filtering accuracy of test oil: 5 μ；
5. DC voltage 12V and 24V;
6. Fuel supply pressure of high-power fuel high-pressure fuel injection pump test bench function: low pressure: 0~0.4mpa, high pressure: 0~4mpa;
7. Pump body pressure display: 0~0.16mpa and 0~1.6mpa;
8. Air pressure display: positive pressure: 0~0.3mpa negative pressure: -0.03~0mpa;
9. Speed preset: 0~3000rpm can be preset arbitrarily;
10. Rack stroke range: 0~25mm;
11. Center height: 125mm;
12. Flywheel inertia: 0.8kg.m2;
13. Output power: 30kW, 37KW, 45KW, etc;
Marine P series fuel injection pump, internal combustion engine high pressure fuel pump, construction machinery engine diesel pump test bench; The equipment supports customized processing. The base of the test bench is cast iron thickened, which runs smoothly. It is equipped with large flow standard fuel injector, widened fuel injection pump sizing block and fixture;
The heavy-duty vector converter drives the main motor with more sufficient torque. The equipment oil tank is 304 stainless steel, which is suitable for all kinds of standard fuel media, and suitable for production and maintenance of oil pump units.
Source of this article: the fuel injection pump test-bed is sorted out and released for reference only, not for practical application. For specific details, please contact the phone on our website for consultation and confirmation.
英文由百度翻译，仅供参考。
