12PSB-NT2000A喷油泵试验台
公司: | 泰安市精达动力机械制造厂 |
---|---|
联系人: | 邹经理 |
手机: | 13854822395(微信同号) |
电话: | 0538-8806938 |
Q Q: | 467884550 |
地址: | 山东省泰安市徐家楼工业园 |
留言咨询 更多信息 | |
分享: |
摘要
精达动力机械制造厂为大家带来关于使用12PSB-NT2000A喷油泵试验台须知的详细介绍,并图文并茂的给大家展示了高压共轨喷油器试验台的使用,预知详情请点击液压泵试验台厂家的官方网站进行查询吧。
12PSB-NT2000A喷油泵试验台
12PSB系列喷油泵试验台的出厂标准:
1、 下机壳部分无划痕,凹陷,色差等明显质量缺陷
2、 工作台中心线与边框平行,无明显偏差
3、 电机中心与工作台高度为125±0.05mm,左右对称为±0.05mm
4、 电机与工作台,工作台与下机壳连接螺栓紧固,有无弹平垫
5、 刻度盘与试验台壳体之间距离为15mm,方便安装转速传感器。
6、 万向节与刻度盘连接紧固,不得刮擦防护罩
7、 供油叶片泵泵与供油电机连接,无间隙转动,紧固螺母旋紧
8、 喷油泵试验台万向节与联轴器加紧后,共轨泵不得有明显摆动。
Factory standard of 12psb series fuel injection pump test bench:
1. The lower casing is free of obvious quality defects such as scratches, dents, color differences, etc
2. The center line of the workbench is parallel to the frame without obvious deviation
3. The height between the motor center and the workbench is 125 ± 0.05mm, and the left-right symmetry is ± 0.05mm
4. The connecting bolts between the motor and the workbench, and between the workbench and the lower casing are fastened, and whether there is an elastic flat pad
5. The distance between the dial and the test bench shell is 15mm, which is convenient for installing the speed sensor.
6. The universal joint is firmly connected with the dial, and the protective cover shall not be scratched
7. The oil supply vane pump is connected with the oil supply motor, rotates without clearance, and the fastening nut is tightened
8. After the universal joint and coupling of the fuel injection pump test bench are tightened, the common rail pump shall not swing significantly.
内容由百度翻译,仅供参考。