很遗憾,因您的浏览器版本过低导致无法获得最佳浏览体验,推荐下载安装谷歌浏览器!

CRS1000高压共轨及机械油泵通用款试验台

公司: 泰安市精达动力机械制造厂
联系人: 邹经理
手机: 13854822395(微信同号)
电话: 0538-8806938
Q Q: 467884550
地址: 山东省泰安市徐家楼工业园
留言咨询 更多信息
分享:

摘要

下面的内容是对于CRS3000型通用款试验台的事项阐述,所展示的高压共轨试验台都是现场拍摄,提供的内容都是经过泰安市泰山区精达动力机械制造厂喷油泵试验台厂家经验所得,请点击进入查看更多液压泵试验台的相关行业信息吧。

CRS3000型通用款试验台产品介绍

  • CRS3000型通用款试验台该款试验台主机传动采用变频无级调速;集试验台的完善技术和新型共轨的结合,既可以检测普通的机械式喷油泵,也可以实现共轨油泵、共轨喷油器及电控调速器油泵。通过控制系统用户可以设定控制参数,试验台模拟ECU输出燃油喷射控制信号,驱动共轨高压泵和共轨喷油器协同工作。本控制系统的喷油器驱动信号脉宽及频率可调;短路保护功能;可以实时测量轨道压力,并具有高压保护功能,电控油泵的测试科根据用户需要附加。该设备的标准功率为15KW。

    CRS3000型通用款试验台可测试BOSCHCP1,CP1-H,CPI-K,CP2,CP3,DELPHI, BOSCH、SIEMENS、DELPHI、DENSO等高压共轨喷油泵,BOSCH(博世),DELPHI(德尔福),SIEMENS(西门子),DENSO(电装)等喷油器。

    特点:

    01、多段电压输出自动控制,满足不同共轨喷油器的驱动要求

    02、LCD液晶显示高压共轨喷油器喷射频率,驱动脉宽自动控制

    03、自动控制待试喷油泵的流量调节阀,控制待试喷油泵的流量

    04、自动实现油轨压力、精度高达到±1MPa

    05、开环或闭环控制方式手动可选

    功能介绍:

    01.测试不同转速下的各缸供油量

    02.静态检查各缸供油的时间

    03.检查调速器性能

    04.分配泵电磁阀的试验

    05.检查气动调速器性能

    06.检查增压补偿器性能

    07.检查分配泵的输油供油能力

  • CRS1000高压共轨及机械油泵通用款试验台

  • 08.测量分配泵泵体内压

    09.检查气膜调速器负压性能

    10.进行喷油泵的密封性试验

    11.测量提前器提前角度

    12.测量高压共轨喷油器的油量;

    13.测量高压共轨喷油器的启动油量;

    14.测量高压共轨喷油器的回油量;

    15.测试轨道压力

    16.测试共轨喷油器的喷油压力

    17.测试共轨喷油器的喷雾锥角

    18.测试共轨喷油器的喷雾均匀性

    19.测试共轨油泵的密封性

    20.测试共轨油泵的供油压力

  • 21. 测试共轨油泵的回油量

    22  电控直列泵 转子泵的测试。(可选)

  • Crs3000 general-purpose test bench the main engine of this test bench adopts variable frequency stepless speed regulation; Combined with the perfect technology of the test-bed and the new common rail, it can not only detect the ordinary mechanical fuel injection pump, but also realize the common rail oil pump, common rail injector and electronically controlled governor oil pump. Through the control system, users can set control parameters, and the test bench simulates ECU to output fuel injection control signals to drive the common rail high-pressure pump and common rail injector to work together. The pulse width and frequency of the fuel injector driving signal of this control system are adjustable; Short circuit protection function; It can measure the track pressure in real time and has the function of high-pressure protection. The testing department of the electric oil pump can add it according to the needs of users. The standard power of the equipment is 15kw.

  • Crs3000 universal test bench can test boschcp1, cp1-h, cpi-k, CP2, CP3, Delphi, Bosch, Siemens, Delphi, Denso and other high-pressure common rail fuel injection pumps, Bosch (Bosch), Delphi (Delphi), Siemens (Siemens), Denso (electrical installation) and other fuel injectors.

  • characteristic:

  • 01. Automatic control of multi-stage voltage output to meet the driving requirements of different common rail injectors

  • 02. LCD liquid crystal displays the injection frequency of high-pressure common rail injector, and the driving pulse width is automatically controlled

  • 03. Automatically control the flow regulating valve of the fuel injection pump to be tested to control the flow of the fuel injection pump to be tested

  • 04. Automatically realize fuel rail pressure with high accuracy of ± 1MPa

  • 05. Open loop or closed loop control mode can be manually selected

  • Function introduction:

  • 01. Test the oil supply of each cylinder at different speeds

  • 02. Statically check the oil supply time of each cylinder

  • 03. Check the governor performance

  • 04. test of distribution pump solenoid valve

  • 05. Check the performance of pneumatic governor

  • 06. Check the performance of boost compensator

  • 07. Check the oil delivery capacity of the distribution pump

  • 08. Measure the internal pressure of the distribution pump

  • 09. Check the negative pressure performance of the air film governor

  • 10. Conduct the sealing test of the fuel injection pump

  • 11. Measure the advance angle of the advancer

  • 12. Measure the fuel quantity of high-pressure common rail injector;

  • 13. Measure the starting oil volume of high-pressure common rail injector;

  • 14. Measure the return oil volume of high-pressure common rail injector;

  • 15. Test track pressure

  • 16. Test the injection pressure of common rail injector

  • 17. Test the spray cone angle of common rail injector

  • 18. Test the spray uniformity of common rail injector

  • 19. Test the sealing of common rail oil pump

  • 20. Test the oil supply pressure of common rail oil pump

  • 21. Test the return oil volume of common rail oil pump

  • 22 test of electric control in-line pump rotor pump. (optional)

  • 英文由百度翻译,仅供参考。


更多>>

相关推荐

  • CRS3000C(CRI200)高压共轨喷油器试验台

  • CRS708高压共轨试验台

  • CRS918高压共轨综合试验台

  • CRS618中压HEUI高压共轨喷油器试验台

泰安市精达动力机械制造厂位于驰名中外的泰山脚下,是喷油泵试验台生产、销售和服务一条龙的汽修检测设备生产企业。主营:校油泵试验台,电喷油泵试验台,高压油泵试验台,电喷油嘴试验台,柴油机油泵试验台,EMC喷油泵试验台,液压油泵方向机试验台,潍柴油泵试验台,高压共轨喷油器试验台,708型电喷试验台等产品畅销国内外市场,深受用户的好评!热线13854822395

CopyRight © 版权所有: 泰安市泰山区精达动力机械制造厂 技术支持:佰搜网 0538-7177991 网站地图 XML

本站关键字: 高压共轨试验台 喷油泵试验台 12psb喷油泵试验台 方向机试验台 液压泵试验台 电喷喷油器试验台 crs高压共轨试验台 喷油器专用工具


高压共轨试验台