柱塞柴油油泵压密封试验台

柱塞柴油油泵压密封试验台：本试验台采用专用机构实现径部动态等压测试法，对被测试偶件柱塞的等压加压和密封值进行测试，夹紧与托起由液压控制；试油压力和密封时间用多功能数字显示仪显示。

柱塞柴油油泵压密封试验台功能特点：

本试验台采用专用机构实现径部动态等压测试法，对被测试偶件柱塞的等压加压和密封值进行测试，夹紧与托起由液压控制；试油压力和密封时间用多功能数字显示仪显示。

技术参数：被测偶件柱塞直径≤φ26mm

被测偶件测试全行程10mm

传动油泵油量10L/min

传动油泵额定压力6.3Mpa

传动油泵电机 1.1KW 4极

夹紧油缸活塞行程60mm

计时范围 0-99.9S

试油压力显示范围0-40Mpa

重复测试误差≤5%

外形尺寸mm 1000×600×150

长×宽×高

液压油泵试验台重量 Kg 650

二、ZJJ型柱塞偶件降压法径部密封性试验台，是用于检测喷油泵柱塞偶件径部密封性的专用设备，能完成中小系列柱塞偶件径部密封性的检验。其特点：采用压力、计时数显仪，检测标准化，状态自动化，测试夹具动作灵活可靠；误差测量示值准确；操作简单维修方便。技术参数：1.可试偶件：Ⅰ、Ⅱ、Ⅲ、A、B、Z喷油泵 2.压力仪表：0～40兆帕 3.气源压力：0.5～0.8兆帕 4.夹紧气压：0.4～0.6兆帕 5.供油气压：0.25～0.35兆帕 6.过滤精度：0.5～0.8微米 7.压力范围：0.05～0.8兆帕 8.外形尺寸：1000×600×1250毫米 9.重量：500千克。

• 

• Functional features of plunger diesel oil pump pressure seal test bench:

• This test-bed adopts a special mechanism to realize the diameter dynamic isobaric test method, which tests the isobaric pressure and sealing value of the plunger of the tested coupling. The clamping and lifting are controlled by hydraulic pressure; The oil test pressure and sealing time are displayed with a multi-function digital display.

• Technical parameters: plunger diameter of the tested coupling ≤ φ 26mm

• The full test stroke of the tested couple is 10mm

• Oil volume of transmission oil pump 10l/min

• Rated pressure of transmission oil pump 6.3MPa

• Drive oil pump motor 1.1KW 4-pole

• Clamping cylinder piston stroke 60mm

• Timing range 0-99.9s

• The display range of oil test pressure is 0-40MPa

• Repeated test error ≤ 5%

• Overall dimension mm 1000 × six hundred × one hundred and fifty

• long × wide × high

• Weight of hydraulic oil pump test bench kg 650

• 2、 ZJJ type plunger coupling pressure reducing radial sealing test bench is a special equipment used to detect the radial sealing of plunger coupling of fuel injection pump, which can complete the inspection of radial sealing of small and medium series plunger coupling. Its features: using pressure, timing digital display, detection standardization, state automation, test fixture action is flexible and reliable; The error measurement indication is accurate; Simple operation and convenient maintenance. Technical parameters: 1. Test coupons: I, II, III, a, B, Z fuel injection pump 2. Pressure instrument: 0 ~ 40 MPa 3. Air source pressure: 0.5 ~ 0.8 MPa 4. Clamping air pressure: 0.4 ~ 0.6 MPa 5. Oil supply air pressure: 0.25 ~ 0.35 MPa 6. Filtration accuracy: 0.5 ~ 0.8 μ M 7. Pressure range: 0.05 ~ 0.8 MPa 8. Overall dimension: 1000 × six hundred × 1250 mm 9. weight: 500 kg.

• 英文由百度翻译，仅供参考。