沃尔沃卡特喷油器分解工具

下面的内容是对于沃尔沃卡特喷油器分解工具的事项阐述，所展示的喷油泵试验台都是现场拍摄，提供的内容都是经过液压泵试验台厂家经验所得，请点击进入查看更多高压共轨试验台的相关行业信息吧。

沃尔沃发动机卡特喷油器在需要维修测试工作中，务必使用专用的分解拆卸工具，其14mm 19mm套筒及外方拆拉工具需在额定的扭矩作用下分解；

使用该工具注意事项如下：

沃尔沃卡特喷油器分解工具说，在喷油嘴和油轨的接口处滴几滴润滑油，轻轻活动几下就可以拔喷油嘴拔下来，拔喷油嘴时在下面接个容器，会有茶半杯汽油流出来，把清洗器的插头和喷油嘴接好，红色的线头接正极，把清洗器的供电卡钳和电瓶接好，红色接正极，黑色接负极，把准备好的化油器清新剂从喷油嘴低端喷入即可。

• 

• 

• When the fuel injector of Volvo engine Carter needs to be repaired and tested, special disassembly and disassembly tools must be used. Its 14mm 19mm sleeve and external disassembly and pulling tools must be disassembled under the action of rated torque;

• Precautions for using this tool are as follows:

• Volvo Carter injector disassembly tool said that drop a few drops of lubricating oil at the interface between the injector and the fuel rail, gently move it for a few times, and then you can pull out the injector. When you pull out the injector, connect a container below, and half a cup of gasoline will flow out. Connect the plug of the washer with the injector, the red wire head with the positive pole, the power supply caliper of the washer with the battery, the red with the positive pole, and the black with the negative pole, Inject the prepared carburetor freshener from the low end of the fuel injector.

• 英文由百度翻译，仅供参考。